Soft over travel Doosan Z290 Fanuc 18i

[vdang2k]

Hello,
I am familiar with clearing OT alarms in the Fanuc 15MB but can't seem to do the same thing on a Doosan Z290 lathe with the Fanuc 18i. Can someone guide me to the right path?
Thank you.

Similar Threads:

• Problem- LNS BARFEEDER ON A DOOSAN PUMA 2000SY FANUC 18i-TB CONTROL
• Doosan/Daewoo HM800 tool changer macro Fanuc 18i-m
• DOOSAN TT1800SY - 18I FANUC - G76 NOT ACTING CORRECTLY
• 2006 Doosan 2000sy Fanuc 18i-TB