Need Help! Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

Results 1 to 11 of 11

Thread: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

  1. #1
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Vertical 5025 machining center
    forgot I had to change spindle location for tool change after changing spindle bearings
    of course it faulted because keys not lined up
    I thought I did everything right to get out of it but still get alarm
    tool arm appears put back, all looks good but get alarm, x and y move but can't move z axis . Z can not be referenced
    Any help to clear the alarm would be appreciated.
    I did read a bulletin about it and it said change Keep Relay K12-B4 parameter 1 to 0 but mine is zero if I am looking in the correct spot.

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    787
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    can you post the ladder file?



  3. #3
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by drdos View Post
    can you post the ladder file?
    LOL I can try, its been 15 years since I got into ladder.
    Let me see If I can figure out how



  4. #4
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    I found the I/O softkey (I assume that is what you wanted) and was able to save to my PCMCIA card but no idea how to post it here or even read it on my PC since its .000 extension.



  5. #5
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by drdos View Post
    can you post the ladder file?
    I figures it out, thanks
    I had to change keep relay 64.4



  6. #6
    Member
    Join Date
    Sep 2007
    Location
    the netherlands
    Posts
    65
    Downloads
    4
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    hi,

    in maintenance mode you can move though the cycle step by step .




    M39 in the MDI

    Move handle to jog

    Go around back and index carousel until it stops moving

    Go back around front

    M19

    M41

    M40

    "copied text from internet" but i can take a photo from my manual

    then if all is well the machine makes 1 tool cycle



    greetings bertus



  7. #7
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    770
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by RaceFan View Post
    I figures it out, thanks
    I had to change keep relay 64.4
    Please note: on some machines this keep relay is K12.4, others it is K64.4
    This relay can only correct the issue if the CAHP.M (changer arm home position. monitor) is a 1 as well as THOMEI.M (tool home indicator. monitor) being a 1 if it is present.
    As these are LADDER issues....they are changeable at any time by alteration or upload of a ladder change. (these potential solutions are not "set in stone" and can be changed to something different)

    DO NOT RANDOMLY change Keep Relays without fully understanding what it will do, or you could cause permanent damage to your machine.

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com M: 973-803-9479


  8. #8
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    770
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by bertus.nl View Post
    hi,

    in maintenance mode you can move though the cycle step by step .




    M39 in the MDI

    Move handle to jog

    Go around back and index carousel until it stops moving

    Go back around front

    M19

    M41

    M40

    "copied text from internet" but i can take a photo from my manual

    then if all is well the machine makes 1 tool cycle



    greetings bertus
    M250 would put it into MAINTENANCE MODE

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com M: 973-803-9479


  9. #9
    Member
    Join Date
    Sep 2007
    Location
    the netherlands
    Posts
    65
    Downloads
    4
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    No

    M39 puts the toolchanger in maintenance mode if you have problems.

    with the buttons of the toolcarrosel you can run forward and back trough the cycle .

    the keeprelay is for telling the machine it is on the home position

    greetings bertus



  10. #10
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by bertus.nl View Post
    hi,

    in maintenance mode you can move though the cycle step by step .




    M39 in the MDI

    Move handle to jog

    Go around back and index carousel until it stops moving

    Go back around front

    M19

    M41

    M40

    "copied text from internet" but i can take a photo from my manual

    then if all is well the machine makes 1 tool cycle



    greetings bertus
    Ah ha, "until it stops moving" . I used the M39 several times in the past vut only to move the arm out of the way. And yes when I tried to resolve this issue, the carousel moved so I stopped and figured it was not working. I needed to rotate carousel a full rotation and then it would stop?



  11. #11
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by dhardt View Post
    Please note: on some machines this keep relay is K12.4, others it is K64.4
    This relay can only correct the issue if the CAHP.M (changer arm home position. monitor) is a 1 as well as THOMEI.M (tool home indicator. monitor) being a 1 if it is present.
    As these are LADDER issues....they are changeable at any time by alteration or upload of a ladder change. (these potential solutions are not "set in stone" and can be changed to something different)

    DO NOT RANDOMLY change Keep Relays without fully understanding what it will do, or you could cause permanent damage to your machine.
    Yes I agree. I looked through the ladder and figured out which latch was needed to clear the fault. I have a little experience with ladders from my G&L repair days 30 years ago lol. It just took a bit to search and find because I don't know how Fanuc works.
    Changer arm was home but can I search for the CAHP.M ? Or better yet, how can I search for it?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle