Need Help! Puma 2600Y II Fanuc 0i-TF Pulse handle

Results 1 to 3 of 3

Thread: Puma 2600Y II Fanuc 0i-TF Pulse handle

  1. #1
    Member
    Join Date
    Sep 2006
    Location
    Finland
    Posts
    208
    Downloads
    0
    Uploads
    0

    Default Puma 2600Y II Fanuc 0i-TF Pulse handle

    Hi,


    Pulse wheel works ok to - direction, but when rotating to + direction movement is not smooth, machine stops suddenly and then starts to move again.
    Position is ok but movement is not smooth.
    There is 4 wire's coming back to pulse wheel, they seem to be ok when shaking.
    Wire's are marked A,B,0V, +V
    What could be reason....new pulse wheel or some card problem ?


    Thanks,

    GB

    Similar Threads:


  2. #2
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    757
    Downloads
    0
    Uploads
    0

    Default Re: Puma 2600Y II Fanuc 0i-TF Pulse handle

    Confirm pinout and voltages though the MPG by using the appropriate drawing for B31 or B32 setup

    If further assistance is needed, call my cell 973-803-9479

    Attached Files Attached Files
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479


  3. #3
    Member
    Join Date
    Sep 2006
    Location
    Finland
    Posts
    208
    Downloads
    0
    Uploads
    0

    Default Re: Puma 2600Y II Fanuc 0i-TF Pulse handle

    MPG was faulty, new one was not expensive and machine rocks again.

    Thanks for help,

    GB



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Puma 2600Y II Fanuc 0i-TF  Pulse handle

Puma 2600Y II Fanuc 0i-TF  Pulse handle

Puma 2600Y II Fanuc 0i-TF  Pulse handle