Doosan Lynx 2100LSYA thermal accuracy

Results 1 to 2 of 2

Thread: Doosan Lynx 2100LSYA thermal accuracy

  1. #1
    Mancraft's Avatar
    Join Date
    Mar 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Doosan Lynx 2100LSYA thermal accuracy

    Guys when you turn machine on at the morning (after some warm up program ofc) how much difference in diameter are you getting at what time? We have about .0014" for first two hours of running it and it's quite frustrating to be honest. How much it should be at those? From the data of this machine, it stands that it should be at about .0004".



  2. #2
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Doosan Lynx 2100LSYA thermal accuracy

    Changes in singular axis positioning from cold to warm to hot are 1 of 2 things:

    Good when cold bad when warm is an incorrectly tensioned "Thermal growth compensation" amount (mechanical)

    Bad when cold, good when warm is an attempt at electrically compensating...but it unfortunately only flips the error (attempted electrical fix to a mechanical problem...requires unfixing the electrical change, and fixing the mechanical one)

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Doosan Lynx 2100LSYA thermal accuracy

Doosan Lynx 2100LSYA thermal accuracy