Here is the photo of the brand's logo, any comment is appreciated.
It turns out that I just bought this lathe at a very good price but the drawback is that it did not bring any type of documentation so now after starting it I have a ram parity for the years that the machine has been stopped and I have no parameters or anything at all. Is there someone who knew what brand this lathe is or had the parameters saved me, if at least I knew what brand it is, I would try to contact the manufacturer or find someone who had a similar lathe, what little I know is that it is a fanuc series OT control of the year 1993 and that is daewo industries korean, thanks in advance.
Here is the photo of the brand's logo, any comment is appreciated.
Nope - no photo's here!
orry, this is the photo of the badge on this shield. I have tried to find it to see what brand it is, but I don't know what this word means in Korean. Any help is appreciated.
Still not happening.
Prb an account limitation issue.
Try putting it on a host site like imgur then link to it.
See if that works.
have if you can confirm if you can see it is rare that you can not see photos thank you very much.
https://imgur.com/YTkXS3L
https://imgur.com/GpLXUdQ
I'll bet for Daewoo Puma 8
Thank you very much Green Button for answering, if that is what I think is an 8hc, it could also be the 10hc of the first ones but the 10hc I don't know why it has 3 pedals and the 8hc has 2 pedals which is like mine, I have already called Daewoo To see if you can sell me the user manual, I am waiting for you to answer me, I will cross my fingers so that there may be because without the user manual it will be very difficult to start it, anyway if someone on the forum knows where I can get the manual user would be appreciated