Tool load monitor Mynx 2017 Fanuc 0i

[Green Button]

Hi,

Little problems with tool load monitor and explanation of symbols:

I manage to record tool load to table.
For example:

Main Spindle:
MAX L1 L2 AIR
60 5 10 05,0

Max is recorded value ?
Is L1 warning limit and L2 breakage limit ? These are variations in percentage % or ??
What is Air

And for Z axis:
G00 MAX L1 L2
139 20 5 10

In Y axis ther is only MAX and L2 value ?

Thanks,

-GB

Similar Threads:

• pls, how to use " tool retract in case of load monitor overload " ?
• U10M spindle load monitor and monitor mode
• Need Help!- Doosan Puma 240 Tool-Load Monitor
• Doosan Tool-Load Monitor
• Series 18/18i / tool load monitor

[Green Button]

Found answer:
max= recorded value
L1= % for warning limit
L2= % for break limit
AIR= time in seconds how much tools not to take load. If exceeded tool broken.

[DouglasR]

Correct.
The big issue is that many folk have too little time in the "AIR" and so the machine craps out thinking the tool is broken.