- Need Help!- Tool load monitor Mynx 2017 Fanuc 0i
-
Member
Tool load monitor Mynx 2017 Fanuc 0i
Hi,
Little problems with tool load monitor and explanation of symbols:
I manage to record tool load to table.
For example:
Main Spindle:
MAX L1 L2 AIR
60 5 10 05,0
Max is recorded value ?
Is L1 warning limit and L2 breakage limit ? These are variations in percentage % or ??
What is Air
And for Z axis:
G00 MAX L1 L2
139 20 5 10
In Y axis ther is only MAX and L2 value ?
Thanks,
-GB
Similar Threads:
-
-
Member
Re: Tool load monitor Mynx 2017 Fanuc 0i
Found answer:
max= recorded value
L1= % for warning limit
L2= % for break limit
AIR= time in seconds how much tools not to take load. If exceeded tool broken.
-
Member
Re: Tool load monitor Mynx 2017 Fanuc 0i
Correct.
The big issue is that many folk have too little time in the "AIR" and so the machine craps out thinking the tool is broken.
- Need Help!- Tool load monitor Mynx 2017 Fanuc 0i
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules