- Need Help!- puma mx2100st spindle warm up alarm
-
Member
puma mx2100st spindle warm up alarm
We began getting a spindle warm up alarm after running most of day. Will run a spindle warm up and still get alarm unable to manually start spindle. Powering down machine and starting back up helps from time to time. any suggestions as to what can cause this?
Similar Threads:
-
-
Member
Re: puma mx2100st spindle warm up alarm
Check keep relay K13.4 (KNSPW): Milling spindle warming up function is not available (1), or is available (0). This won't fix whatever is causing the issue but it might get you going until you can get it fixed properly. Also, I'd confirm that keep number by checking in your blue book, should be in the pocket in the electrical cabinet door.
- Need Help!- puma mx2100st spindle warm up alarm
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules