puma 250 bx

Results 1 to 3 of 3

Thread: puma 250 bx

  1. #1
    Member hbterry's Avatar
    Join Date
    Mar 2017
    Location
    2503
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default puma 250 bx

    My turret will index cw. When trying to index cc there is no movement. This machine set for about 4 months and was working fine. Could this be the hydraulic valve stuck?

    Similar Threads:


  2. #2
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: puma 250 bx

    Look at your electrical manual.
    If hydraulic motor turret, which solenoid is ccw?
    Is it getting 24vdc, but not moving?

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  3. #3
    Member hbterry's Avatar
    Join Date
    Mar 2017
    Location
    2503
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: puma 250 bx

    I do not have power at the solenoid.

    Last edited by hbterry; 03-16-2021 at 02:14 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

puma 250 bx

puma 250 bx