Puma 200 Fanuc 18-T part counter M code

[TubbyTradesman]

I'm a little lost at this point I don't know what file format my backup is, and the txt file is not loading to machine, I also have a friend with LADDER 3 can open either file, says invalid memory card file. He can't seem to figure it out but he's electrical guy not CNC. This machine I have has symbolic FAPT and when I was doing some research I came across FAPT ladder software wondering if I need this?

[TubbyTradesman]

I forgot to mention that my machine has no USB or memory card slot, it only communicates with RS-232, I hooked up our laptop directly to the machine in order to get the LADDER backup I provided in this thread.