- Alarm 2010 Fanuc 18-T, Suggestions?
-
Member
Alarm 2010 Fanuc 18-T, Suggestions?
Daewoo Puma 200S running a Fanuc 18-T, machine ran fine the night before and the next morning we get a 2010 alarm "Spindle Rotation Is Abnormal". Power it off and restart it doesn't help, the hydraulic pump will come on and run about 5 seconds then shuts off. Any suggestions? Thanks!
Similar Threads:
-
-
Member
Re: Alarm 2010 Fanuc 18-T, Suggestions?
Check incoming voltage. Also check for popped breakers.
-
Member
Re: Alarm 2010 Fanuc 18-T, Suggestions?
Check 24v supply if hydraulics shutting down possibly due to lack of signal that they are on.
The encoder requires 24v to activate as well
- Alarm 2010 Fanuc 18-T, Suggestions?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules