15" OI TT1800SY

Results 1 to 3 of 3

Thread: 15" OI TT1800SY

  1. #1
    Member
    Join Date
    Jun 2006
    Location
    USA
    Posts
    370
    Downloads
    0
    Uploads
    0

    Default 15" OI TT1800SY

    My lead guy didn't come in today- took a personal day. End of last week morale was pretty low. The TT1800SY with the new 15" OI control has been on the floor 5 weeks and isn't machine ready because the tool load monitoring isn't working.

    I wanted to buy a 31I model, but they are apparently not available anymore. This is not normal for us to have Doosans that can't be completed through floor install to an operable condition with no end in sight.

    I don't have communication with anyone from corporate. We tried to reach out to Jamie Ochs for this but couldn't reach him. Ellison seems busy, I get the feeling they are not logistically able to support this install, because it has reached a technical level that is potentially beyond anyone they have to support it with.

    This machine was apparently fielded before it was developed to a sale ready condition.

    End of last week we put a third job in our 15" OI puma, and it had one episode where it spit us a bunch of the weird looking loads like the TT is outputting everywhere, but they were all spindle loads, and we just shut spindle monitoring off for that job. It seems 15" OI is not handling load monitoring like the 10.4" OI.

    Similar Threads:


  2. #2
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    689
    Downloads
    0
    Uploads
    0

    Default Re: 15" OI TT1800SY

    You do know that the footer of every post I've ever made here... Has my cell number and email address on it.

    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479


  3. #3
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    331
    Downloads
    0
    Uploads
    0

    Default Re: 15" OI TT1800SY

    I do have the classroom manuals for it,if you need. PM me.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

15" OI TT1800SY

15" OI TT1800SY

15" OI TT1800SY