Doosan Puma 3100LY bar feeder problem

Results 1 to 4 of 4

Thread: Doosan Puma 3100LY bar feeder problem

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    Somalia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Doosan Puma 3100LY bar feeder problem

    So after two years or something like that my bosses decided its finally time to set up unused bar feeder called Spacesaver 2410.

    And here lies the problem or should i say somewhere amidst the bar feeder and bar feeder subprogram.

    Also machine is operated with Siemens 828d and not Fanuc.

    Also subprogram

    M31
    G0 Z50
    M69
    M51
    G4 F3
    M51
    G0 Z0.5
    M68
    G4 F3
    M17

    Barfeeder sends alarm "waiting for m code" around m code M51 which is supposed to be right code but i have no idea anymore.
    So where lies the problem.

    Any help strongly appreciated.

    Thank you.



  2. #2
    Registered
    Join Date
    Mar 2018
    Location
    Somalia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Also bar feeder loads new bar into lathe but stops stops when material is at the lathe and sends out the upper alarm.



  3. #3
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    329
    Downloads
    0
    Uploads
    0

    Default Re: Doosan Puma 3100LY bar feeder problem

    It's waiting for some kind of confirmation. M51 is the code for Bar Feed in Fanuc land, but it may not be in Siemens land.



  4. #4
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    606
    Downloads
    0
    Uploads
    0

    Default Re: Doosan Puma 3100LY bar feeder problem

    Quote Originally Posted by MetaldesignSLO View Post
    Also bar feeder loads new bar into lathe but stops stops when material is at the lathe and sends out the upper alarm.
    This is from a timer being set to a slightly shorter number than the reload time requires. Set it higher. Timer for M51
    I don't know what that is on a siemens control. Your local Doosan Dealer or Local Doosan branch should be able to assist with that Siemens control.

    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Doosan Puma 3100LY bar feeder problem

Doosan Puma 3100LY bar feeder problem

Doosan Puma 3100LY bar feeder problem