Doosan 2600Y II

Results 1 to 2 of 2

Thread: Doosan 2600Y II

  1. #1
    Member
    Join Date
    Sep 2006
    Location
    Finland
    Posts
    222
    Downloads
    0
    Uploads
    0

    Default Doosan 2600Y II

    Hi,

    Machineoosan PUMA 2600Y II -2019
    Fanuc 0i-series

    When driven tools are used there is spindle load meter (s2)
    Blue, yellow, and red area
    I do remember that in blue area you can be all time, in yellow are 15min /60min and in red zone you can just "visit"
    For some reason, in our Doosan max % in meter is 600%
    Can you trust to colors, because yellow area goes approx 500% ?? So its safe to drive over 100% ??

    Doosan 2600Y II-load-jpg

    GB

    Similar Threads:


  2. #2
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    380
    Downloads
    0
    Uploads
    0

    Default Re: Doosan 2600Y II

    Yes, trust the colors. When I worked there we routinely ran live tools into the yellow for 15 minutes and no problems.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Doosan 2600Y II

Doosan 2600Y II