Fanuc 920 servo alarm 1998 DAEWOO LYNX 200A

Results 1 to 1 of 1

Thread: Fanuc 920 servo alarm 1998 DAEWOO LYNX 200A

  1. #1
    Activation process collective9999's Avatar
    Join Date
    Jul 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Fanuc 920 servo alarm 1998 DAEWOO LYNX 200A

    Hello fellow metal enthusiast. I bought a nice machine but had problems getting running. First of all I have system alarm error 920 Servo alarm (1/2 axis)
    I have sent out the servo drive and it checks out good. Then, I don’t know what to do next. I have removed the CPU board and I believe there is RAM board missing, or could be the whole PCB board? Does anyone had this problem?
    Also the machine was not working for 4 years. The parameters probably are out. Anybody has backup?
    Thanking in advance all your help.

    Attached Thumbnails Attached Thumbnails Fanuc 920 servo alarm 1998 DAEWOO LYNX 200A-3784d219-19ba-4c6b-9f0d-c59406394f82-jpg  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 920 servo alarm 1998 DAEWOO LYNX 200A

Fanuc 920 servo alarm 1998 DAEWOO LYNX 200A