Doosan puma mx2100 rigid tapping alarm

Results 1 to 5 of 5

Thread: Doosan puma mx2100 rigid tapping alarm

  1. #1
    Member
    Join Date
    Oct 2008
    Location
    Slovenia
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Doosan puma mx2100 rigid tapping alarm

    Hello!
    I need help with the issue by rigid tapping with lower turret on left spindle.
    I get alarm for RIGID MODE DI SIGNAL OFF.
    I don't know where is the problemm in programm.If I enter M29 S300 P21 or P22 cycle work normaly.Only with the P11 doesn't want to work.
    Can anybody help me.
    Regards
    Janko

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Doosan puma mx2100 rigid tapping alarm-20190817_133734-jpg   Doosan puma mx2100 rigid tapping alarm-20190817_133740-jpg  
    Last edited by toneko; 08-17-2019 at 02:59 PM.


  2. #2
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    316
    Downloads
    0
    Uploads
    0

    Default Re: Doosan puma mx2100 rigid tapping alarm

    There are a few things here.

    You're trying to access the main spindle from the lower path. If you "really" want to do that, you need an M264 "other pulse coder" command on a line by itself BEFORE the commands and then a M265 afterwards.



  3. #3
    Member
    Join Date
    Oct 2008
    Location
    Slovenia
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by DouglasR View Post
    There are a few things here.

    You're trying to access the main spindle from the lower path. If you "really" want to do that, you need an M264 "other pulse coder" command on a line by itself BEFORE the commands and then a M265 afterwards.
    That's right!
    I tryed with M264 but I get the same alarm.



  4. #4
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    316
    Downloads
    0
    Uploads
    0

    Default Re: Doosan puma mx2100 rigid tapping alarm

    Hmm..

    M264 Has to be on a line by itself, before any spindle commands.
    the rigid tap line should read G97S250M29P11 then the G84 Z-.5F.05, G80, then M265.



  5. #5
    Member
    Join Date
    Oct 2008
    Location
    Slovenia
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by DouglasR View Post
    Hmm..

    M264 Has to be on a line by itself, before any spindle commands.
    the rigid tap line should read G97S250M29P11 then the G84 Z-.5F.05, G80, then M265.
    I tryed but I get the same Alarm on
    Line
    G97S250M29P11



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Doosan puma mx2100 rigid tapping alarm

Doosan puma mx2100 rigid tapping alarm

Doosan puma mx2100 rigid tapping alarm