Doosan puma mx2100 rigid tapping alarm

Results 1 to 5 of 5

Thread: Doosan puma mx2100 rigid tapping alarm

  1. #1
    Member
    Join Date
    Oct 2008
    Location
    Slovenia
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Doosan puma mx2100 rigid tapping alarm

    Hello!
    I need help with the issue by rigid tapping with lower turret on left spindle.
    I get alarm for RIGID MODE DI SIGNAL OFF.
    I don't know where is the problemm in programm.If I enter M29 S300 P21 or P22 cycle work normaly.Only with the P11 doesn't want to work.
    Can anybody help me.
    Regards
    Janko

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Doosan puma mx2100 rigid tapping alarm-20190817_133734-jpg   Doosan puma mx2100 rigid tapping alarm-20190817_133740-jpg  
    Last edited by toneko; 08-17-2019 at 02:59 PM.


  2. #2
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    380
    Downloads
    0
    Uploads
    0

    Default Re: Doosan puma mx2100 rigid tapping alarm

    There are a few things here.

    You're trying to access the main spindle from the lower path. If you "really" want to do that, you need an M264 "other pulse coder" command on a line by itself BEFORE the commands and then a M265 afterwards.



  3. #3
    Member
    Join Date
    Oct 2008
    Location
    Slovenia
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by DouglasR View Post
    There are a few things here.

    You're trying to access the main spindle from the lower path. If you "really" want to do that, you need an M264 "other pulse coder" command on a line by itself BEFORE the commands and then a M265 afterwards.
    That's right!
    I tryed with M264 but I get the same alarm.



  4. #4
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    380
    Downloads
    0
    Uploads
    0

    Default Re: Doosan puma mx2100 rigid tapping alarm

    Hmm..

    M264 Has to be on a line by itself, before any spindle commands.
    the rigid tap line should read G97S250M29P11 then the G84 Z-.5F.05, G80, then M265.



  5. #5
    Member
    Join Date
    Oct 2008
    Location
    Slovenia
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by DouglasR View Post
    Hmm..

    M264 Has to be on a line by itself, before any spindle commands.
    the rigid tap line should read G97S250M29P11 then the G84 Z-.5F.05, G80, then M265.
    I tryed but I get the same Alarm on
    Line
    G97S250M29P11



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Doosan puma mx2100 rigid tapping alarm

Doosan puma mx2100 rigid tapping alarm