HELP!! 2001 lynx suddenly wont index

[Pmsmachine]

Hey guy/gals.
I started my own shop about 6 months , I just got a 2001 lynx 200 in a auction. I was running parts on it all week, every once and a while the turret would hang up and not fully seat. (normally in the mornings) today I had to drop some parts off at a customers, got back about lunch time and turned on the lathe to warm up the spindle. went to lunch with the neighbor,came back loaded my program and now the turret wont even attempt to index. the index light comes on then I get alarm code 2023. I tried searching in the control for this alarm and it said data out of range. I didn't get any manuals as the place was going out of business . Any help would be great!! I am a one man shop right now and of course the lathe has work and my 2 tigers are slow for work.

thanks
matt

Similar Threads:

• Need Help!- Haas 2010 TM2P suddenly wont boot up!
• G540 suddenly wont power on
• Index GS30 (Index s3)
• Need Help!- Solidworks 2001
• Need Help!- 2001 VF1 Wont boot up!

[DouglasR]

Have you tried indexing with MDI commands?
Is the Turret at home position?
Still have problems? Call Darryl Hardt at Doosan Service - 973-618-2500 9:00 am to 5m est.

[Green Button]

Alarm 2023 might be that tool indexing in not done in certain time.
There is some problem in motor or mechanical issue.
You might have broken mid axel.