What does the text of the alarm say? What control on the machine?
We have a Daewoo 300LM that we are getting this alarm on intermittently. We changed out the turret confirmation prox switch but it didn't go away. We power down and reset, it will run for days between alarms and will throw this alarm in the middle of a cut. Any help would be greatly appreciated.
Similar Threads:
What does the text of the alarm say? What control on the machine?
18 I control "The tool and rev. spindle condition alarm. Check confirmation switch in tool post unit"
What is the address of this alarm in PMC ladder? If you share me a copy of ladder I could help you...
I'm not entirely sure. I'm going to ask service.
See attached document for a similar machine.
No longer with Doosan Machine Tools America
darrylhardt@gmail.com
We did get it resolved but it has been so long that I don't recall what the fix was.