Doosan 250 fanuc 18T

Results 1 to 3 of 3

Thread: Doosan 250 fanuc 18T

  1. #1
    Member positiverake's Avatar
    Join Date
    Sep 2005
    Location
    United States
    Posts
    269
    Downloads
    0
    Uploads
    0

    Default Doosan 250 fanuc 18T

    Anybody have a tailstock macro for this machine?
    Thanks

    Similar Threads:


  2. #2
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Doosan 250 fanuc 18T

    According to Michael An, the highest level of knowledge for Doosan/Fanuc Electrical/Ladder history in the US.

    There never was a tailstock macro for an 18t control, because it was not capable of using it.

    If someone (aftermarket) is/was able to create one...I would be interested to know more...

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  3. #3
    Member positiverake's Avatar
    Join Date
    Sep 2005
    Location
    United States
    Posts
    269
    Downloads
    0
    Uploads
    0

    Default Re: Doosan 250 fanuc 18T

    I just Made 3 M codes, 1 to record the G53 pos. 1 to go get the tail stock and 1 to put it back, works ok, would have been nice to have the tail stock Button record the G53 pos. but MDI is almost as good. thanks for the reply.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Doosan 250 fanuc 18T

Doosan 250 fanuc 18T