dooan 7500 mill 2161 lub pressure down alarm

Results 1 to 3 of 3

Thread: dooan 7500 mill 2161 lub pressure down alarm

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default dooan 7500 mill 2161 lub pressure down alarm

    I am getting this alarm quite often. the gauge action if fine. I am getting it when the pressure is in the green. sometimes the pump cycles right but sometimes it will cut on as soon as you move an axis and wont cut off until it alarms out. can anyone help?

    Similar Threads:


  2. #2
    Registered dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    494
    Downloads
    0
    Uploads
    0

    Default Re: dooan 7500 mill 2161 lub pressure down alarm

    If the gauge is truly displaying correctly, and you are understanding it correctly, then the likelihood is that the pressure switch is failing. This can be verified by checking the actions of the I/O signal of the switch.

    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479


  3. #3
    Registered
    Join Date
    Mar 2018
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: dooan 7500 mill 2161 lub pressure down alarm

    I verified the switch was not working by the action of the I/O. I changed the switch and it fixed the problem thanks.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

dooan 7500 mill 2161 lub pressure down alarm

dooan 7500 mill 2161 lub pressure down alarm