Laser week, we developed a new postprocessor for plasma bevel cutting machine, the control START Sharpon is used on it.

Thanks for the new tool management feature involved in CutLeader V6, we could add severial tools with different bevel angle and the enty/exit radius.

Based on the tool assignment rules, the bevel tool can be assigned to contour automatically by the mapping of dxf/dwg's layer/color in the drawing.

User can assign bevel tool to parts mannuall for sure.

In oder to reduce the twining of cable during bevel cutting, postprocessor would move the start position to the left side of contour automatically. So user don't need set the start position one by one manually.

Similar Threads: