- Seperate Part automatically
-
Member
Seperate Part automatically
The CutLeader is enhanced to identify parts automatically.
When we import s DXF with may parts, CutLeader could identify them automatically now. Lead in/out, cut side would be auto assigned also.
If there are many same parts in the DXF, CutLeader could find out them also, then you can edit the cam features in batch mode for all the same parts. No need to edit one by one anymore.
The part in part could be identified also.
This enhance feature works for both mannual and automatic nesting.
Similar Threads:
-
- Seperate Part automatically
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules