- Square stock only?
-
Registered
Square stock only?
Can't I start with a sphere, or a forging or casting?
Very little of my work is based on a rectangular piece of stock to start...and I don't want to be cutting air.
Similar Threads:
-
-
Registered
I have used this workaround in the past.
Start with square stock.
Make an operation to remove all the stock from the square so it loosely follows your actual stock shape.
Do your normal operations to actually machine the part.
When you post your code, don't post that first operation and then you will not be cutting air.
- Square stock only?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules