need help - novusun NCH02 - stops always to the very same line of part program


Results 1 to 1 of 1

Thread: need help - novusun NCH02 - stops always to the very same line of part program

  1. #1
    Member
    Join Date
    Dec 2008
    Location
    italy
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default need help - novusun NCH02 - stops always to the very same line of part program

    HI,
    hope someone can help me.

    In Fusion 360 I made same 2D pockets (see image attached) and I uploaded through the USB Key to the novusun controller (NCH02 / NCD02).
    It always stops (and I do not know why) to the same line during the 4th pocket as I pointed out.
    There is no alarm, simply the spindle remains ON at the same speed but it doesn't move anymore. It's paused by something.
    I repeated the operation in various areas of the machine with the same result.

    I checked the program generated by Fusion 360 but it's plain Gcode and it seems, to me, all right.
    As post processor I used Mach3Mill

    Thanks for any help.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails need help - novusun NCH02 - stops always to the very same line of part program-help-1-jpg  


  2. #2
    Member
    Join Date
    Mar 2017
    Location
    Portugal
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: need help - novusun NCH02 - stops always to the very same line of part program

    Hi, my ddcsv2.1 have same problem...
    My is hardware problem, try clean usb contact






    Quote Originally Posted by matur61 View Post
    HI,
    hope someone can help me.

    In Fusion 360 I made same 2D pockets (see image attached) and I uploaded through the USB Key to the novusun controller (NCH02 / NCD02).
    It always stops (and I do not know why) to the same line during the 4th pocket as I pointed out.
    There is no alarm, simply the spindle remains ON at the same speed but it doesn't move anymore. It's paused by something.
    I repeated the operation in various areas of the machine with the same result.

    I checked the program generated by Fusion 360 but it's plain Gcode and it seems, to me, all right.
    As post processor I used Mach3Mill

    Thanks for any help.




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help - novusun NCH02 - stops always to the very same line of part program

need help - novusun NCH02 - stops always to the very same line of part program