Using BSMCEO4-PP USB Controller Board with lathe.


Results 1 to 2 of 2

Thread: Using BSMCEO4-PP USB Controller Board with lathe.

  1. #1
    Member
    Join Date
    Jul 2009
    Location
    UK
    Posts
    9
    Downloads
    2
    Uploads
    0

    Default Using BSMCEO4-PP USB Controller Board with lathe.

    I've been using the BSMCEO4-PP USB Controller board the RnR Plugin and Mach3 to control a converted Seig X3 mill with no problems.

    I also have a Boxford Orac lathe running Mach3 through a parallel port and I'm trying to convert this to USB using the above board. I've purchase another board an connected it up.

    There's no problem running the steppers, limit switches etc as this is similar to the mill. However, I have been unable to get the spindle index to work correctly. The lathe currently has an OPB704 opto-switch sensor and CNC4PC index pulse card fitted, the output from this is supplied to the parallel port BOB and it works well.

    When using the USB board the index pulse only triggers the input port once. I have tried using the handwheel interface as an input as described in https://buildyourcnc.com/Item/electr...ach3-USB-Board using port 3 pin12 and also using the standard input port 3 pin1 using the circuit shown in the PDF. In both instances the index tab lights in Mach3 turn diags screen but only on the first pulse.

    I was wondering if any body has managed to get the index signal to work or could the offer any advice as to how I may get the thing to work. I would really like to update the lathe to USB control.

    Thanks in advanced.

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    34403
    Downloads
    0
    Uploads
    0

    Default Re: Using BSMCEO4-PP USB Controller Board with lathe.

    I wouldn't expect any Chinese board to work with Mach3 lathe. Virtually all Chinese boards have some issues with Mach3.
    You're best bet is to buy a non chinese controller, like an ESS.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Using BSMCEO4-PP USB Controller Board with lathe.

Using BSMCEO4-PP USB Controller Board with lathe.