Need Help! Help with Novusun NVUM V2 USB control card - Page 2


Page 2 of 2 FirstFirst 12
Results 21 to 31 of 31

Thread: Help with Novusun NVUM V2 USB control card

  1. #21
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1740
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Quote Originally Posted by ZASto View Post
    HI,

    what kind of support you have from linked seller? The board at China costs less than $20 (approx 13€ with shipping).
    Just take a look at the Mach forum. It's up to you that live in belief that paying $90 for a $20 product will provide you a quality support.
    Guy, ah it sells as above on the link I posted for $89 in the USA, so what the hell are you talking about!! The NVMU or whatever I did not buy! The one below that is what I have ordered.


    Help with Novusun NVUM V2 USB control card-cncboard-jpg

    Help with Novusun NVUM V2 USB control card-pmdx-jpg

    Last edited by wmgeorge; 03-23-2020 at 07:39 PM.
    1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro


  2. #22
    Member
    Join Date
    Nov 2013
    Posts
    4241
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Hi,

    Guy, ah it sells as above on the link I posted for $89 in the USA
    That means you are being ripped, they are available for $20 elsewhere. To be honest I think $20 is a rip too.

    Craig



  3. #23
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1740
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Ok Craig the floor is all yours... have at it. Thanks for your help.

    1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro


  4. #24
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Quote Originally Posted by joeavaerage View Post
    Hi,



    That means you are being ripped, they are available for $20 elsewhere. To be honest I think $20 is a rip too.

    Craig
    They may not be the same boards the cheap one's may be copies of the original manufactured board this happens a lot $89 sounds about right for a 100Khz board if you compare it with the 100Khz UC100 it is a little cheaper than the UC100 at $89 so may not be a rip off at all get the facts correct, what you are saying is not credible as you don't have hands on experience with this board

    Remember electronically challenged installer's will have trouble with any system no matter how fool proof they are made what you see on the forums is typical of people in need of help and 99% are electronically challenged

    I have no use for one of these boards but will buy one just to see if they are bad or not

    Mactec54


  5. #25
    Member pociu's Avatar
    Join Date
    Feb 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Quote Originally Posted by Galoptic View Post
    I have had the same problem after six months use started getting load BIN file message. Anyway after much searching found BIN file and loaded it all good again. the BIN file can be downloaded from following link on the Novusun web page. https://www.nvcnc.net/nvum.html Button bottom middle of screen. Or direct link https://www.nvcnc.net/pdf/nvum.bin.rar

    John
    Hello Galoptic
    I would like to ask you where you finded bin.file for novusun. I am looking for the bin file for NVEM V2. I suspect that after the connection analog output of spindle to the analog input of inverter the firmware was cleared. Something goes wrong. NVEM worked ok ealier after this situation NVEM not respodnds.
    Thank you in advance for your responce



  6. #26
    avtostv's Avatar
    Join Date
    Mar 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    ???? ??????.? ???? ???? ????? ???????? ????????.? ?????? ?? ???? ????????? ?? ????? ??????????.?? ????? ??? ???????? ?



  7. #27
    Member
    Join Date
    Dec 2017
    Location
    Belgium
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Quote Originally Posted by pociu View Post
    Hello Galoptic
    I would like to ask you where you finded bin.file for novusun. I am looking for the bin file for NVEM V2. I suspect that after the connection analog output of spindle to the analog input of inverter the firmware was cleared. Something goes wrong. NVEM worked ok ealier after this situation NVEM not respodnds.
    Thank you in advance for your responce
    Files for NVEM here https://www.nvcnc.net/nvem.html



  8. #28
    Member aligaman's Avatar
    Join Date
    May 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Hi Streumer,
    the NVUM-bin file link above has been broken for a while (404 Not Found). it would be a great help if you have the bin file on google drive or a sure download link! I can't find it anywhere online.
    thank you



  9. #29
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    1516
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    I can sum this up in 2 mins.

    The website likely hasn't been updated in last 10 years.
    They never patented the controller.
    The ones you buy now are copies of the original.
    Support does not exist.



  10. #30
    Member
    Join Date
    Dec 2017
    Location
    Belgium
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Quote Originally Posted by aligaman View Post
    Hi Streumer,
    the NVUM-bin file link above has been broken for a while (404 Not Found). it would be a great help if you have the bin file on google drive or a sure download link! I can't find it anywhere online.
    thank you
    pm ME



  11. #31
    amin485's Avatar
    Join Date
    May 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card

    Hi,
    This link to nvum firmware bin file does not work. COuld you please send the file or a valid link?
    I am very in need to fix my novusun cnc controller.
    thanks,



  12. #32
    Member
    Join Date
    Jul 2013
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help with Novusun NVUM V2 USB control card



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with Novusun NVUM V2 USB control card

Help with Novusun NVUM V2 USB control card