Can you convert a 3 axis AKZ250 to 4 axis?


Results 1 to 4 of 4

Thread: Can you convert a 3 axis AKZ250 to 4 axis?

  1. #1
    Member Azalin's Avatar
    Join Date
    Mar 2014
    Location
    Turkey
    Posts
    936
    Downloads
    0
    Uploads
    0

    Default Can you convert a 3 axis AKZ250 to 4 axis?

    I have a 3 axis AKZ250 USB board (aka Leafboy card). On the right side of the board (see the yellow circle on the attached image) there is two optos missing. Looks like soldering there the right components will make it 4 axis however that's just my guessing. Has anyone tried this? Did/will it work?

    Thanks in advance.

    Best,
    Suat

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Can you convert a 3 axis AKZ250 to 4 axis?-akz-jpg  
    Suat
    Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby


  2. #2
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    731
    Downloads
    4
    Uploads
    0

    Default Re: Can you convert a 3 axis AKZ250 to 4 axis?

    It should work if the firmware is the same for 3-axis and 4-axis cards. But I suspect the 4th axis is disabled in the firmware.



  3. #3
    Member Azalin's Avatar
    Join Date
    Mar 2014
    Location
    Turkey
    Posts
    936
    Downloads
    0
    Uploads
    0

    Default Re: Can you convert a 3 axis AKZ250 to 4 axis?

    I guess you are right.

    Suat
    Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby


  4. #4
    Member
    Join Date
    Oct 2005
    Location
    New Zealand
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Can you convert a 3 axis AKZ250 to 4 axis?

    Ive just soldered 2 new chips.. damn no action. how to get the firmware?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Can you convert a 3 axis AKZ250 to 4 axis?

Can you convert a 3 axis AKZ250 to 4 axis?