It should work if the firmware is the same for 3-axis and 4-axis cards. But I suspect the 4th axis is disabled in the firmware.
I have a 3 axis AKZ250 USB board (aka Leafboy card). On the right side of the board (see the yellow circle on the attached image) there is two optos missing. Looks like soldering there the right components will make it 4 axis however that's just my guessing. Has anyone tried this? Did/will it work?
Thanks in advance.
Best,
Suat
Similar Threads:
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
It should work if the firmware is the same for 3-axis and 4-axis cards. But I suspect the 4th axis is disabled in the firmware.
I guess you are right.
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
Ive just soldered 2 new chips.. damn no action. how to get the firmware?
did`t you ever get it to work ?? same issue here
If you are asking me, sorry I've never tried.
Sent from my MI 5s Plus using Tapatalk
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby