Hi,
sorry if i picked the wrong forum, i'm new here.
i picked up a used 2axis machine that has 2 berger lahr vrdm 3913 motors attached to two controllers:
1x TLC 611 F
and
1x TLC 411 F
they are connected by can-c cable. (see picture)
question is what would be the best way to control these and which software would you recommend, ideally something under linux?
it seems that currently there is some fixed program burned in that i would need to deactivate to attach a pc.
but from reading the TLC manual ( https://download.schneider-electric....ference=TLC61x )
it is first of all unclear to me how you would actually control this from a PC
Similar Threads: