Need Help! unlock code for BOSCH CNC CC220 - Page 2


Page 2 of 2 FirstFirst 12
Results 21 to 30 of 30

Thread: unlock code for BOSCH CNC CC220

  1. #21
    Registered
    Join Date
    Apr 2015
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by darishd View Post
    Hello,I have problem with BOSCH CC300,PANEL STATUS..... NO DATA TRANSFER TO NC INTERFACE.... PANEL TRANSMITTER LINE FAULTY.
    Dear darisch, we have same error with grafic interface error. How can we solve it, could you give any answer,please.



  2. #22
    Registered
    Join Date
    Apr 2015
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hi,

    We have cc 300 cnc with pc 600 plc. When we turn on the machine, the plc is from stop to run and than suddenly turn stop mode again. And also the screen doesn' t open with main menu. It gives " grafic interface error ". Could we solve it, we need help, please.



  3. #23
    Registered
    Join Date
    Jul 2017
    Location
    Tunisia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    281
    AFTER RESET
    IF YOU HAVE ERROR 814
    INITIALIZE WITH CODE 630



  4. #24
    Registered
    Join Date
    Jul 2017
    Location
    Tunisia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    SPS TIME INHIBIT
    IF YOU HAVE ANY IDEA FOR THIS ERROR
    AND IF THERE IS A CABLE BETWEEN X11 PORT OF BOCH C220 AND X11 PORT OF CN PART



  5. #25
    Member
    Join Date
    May 2010
    Location
    South Africa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    SPS time inhibit is normally a flat battery. Please forward system configuration to behr@icon.co.za



  6. #26
    *Registered User* apspalani's Avatar
    Join Date
    Oct 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    Quote Originally Posted by JuanMatus View Post
    Does somebody knows the code for unlocking parameters memmory of BOSCH
    CNC C220. Also what means error m?ssage NC-FEHLER 2665?
    Dears all
    we have Trumpf make Tc 500 Turret Punch machine There using Bosch Controller ,In this Display showing Error 262, with Rest/Boot/Display Commends ,We Pressed these 3- Buttons ,But Any Changes Nil this display,Please Help me to Solve this issue ,This Machine Shutdown past 15 months ,Please reply me



  7. #27
    *Registered User* apspalani's Avatar
    Join Date
    Oct 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    Machine in India



  8. #28
    Member
    Join Date
    May 2010
    Location
    South Africa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    Hi,
    Batteries need to be replaced once a year. System software needs to be reloaded from EEPROM including valid machine parameters. Then the relevant machine options must be set according to the list supply. Direct contact behr@icon.co.za



  9. #29
    Femoart63's Avatar
    Join Date
    Mar 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    bosch cnc c100



  10. #30
    Ladis666's Avatar
    Join Date
    Sep 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by apspalani View Post
    Dears all
    we have Trumpf make Tc 500 Turret Punch machine There using Bosch Controller ,In this Display showing Error 262, with Rest/Boot/Display Commends ,We Pressed these 3- Buttons ,But Any Changes Nil this display,Please Help me to Solve this issue ,This Machine Shutdown past 15 months ,Please reply me
    Hi, any movement in your issue? Have you tested all the batteries? Have you reload from EPROM? Do you have some documentation with configuration of your machine?

    L.



  11. #31

    Join Date
    Jan 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hello,I have problem with BOSCH CC200,PANEL STATUS..... NO DATA TRANSFER TO NC INTERFACE.... PANEL
    nc-interface :status error [halt}
    nc transmitterletung defekt



  12. #32
    Member KM2's Avatar
    Join Date
    Dec 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    Hey yall so i just came across this thread. I am having trouble with my TR200 TRUMATIC cnc machine. It is giving the error clamps not closed even though they are all closed as it should be. I checked the PS-100 Bosch 24V-error light and it is red and it usually is off whenever th4e machine is running. Cleaned up the vent to make sure that the oil is releasing heat as it should. When i turn it off for a couple of hours it does react normal but then goes back to showing the same error. CLAMPS NOT CLOSED after running one or two programs. What could be the problem. I will greatly appreciate yalls help. Thanks.



  13. #33
    Member
    Join Date
    May 2010
    Location
    South Africa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    Quote Originally Posted by KM2 View Post
    Hey yall so i just came across this thread. I am having trouble with my TR200 TRUMATIC cnc machine. It is giving the error clamps not closed even though they are all closed as it should be. I checked the PS-100 Bosch 24V-error light and it is red and it usually is off whenever th4e machine is running. Cleaned up the vent to make sure that the oil is releasing heat as it should. When i turn it off for a couple of hours it does react normal but then goes back to showing the same error. CLAMPS NOT CLOSED after running one or two programs. What could be the problem. I will greatly appreciate yalls help. Thanks.

    1. Check the oil level
    2. When did you last changed the oil filter?
    3. Check pressure switch M43+S4 and input E44.7

    You can contact me on behr@icon.co.za

    Thanks



  14. #34

    Join Date
    Sep 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: unlock code for BOSCH CNC CC220

    I have the same exact error on the screen. The control is bosch cc200 on a trumpf tc240 machine.

    >No Data transfer to NC Interface
    >NC transmitter line defect!

    Did anybody figure out how to solve this.

    Thank you!!!



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

unlock code for BOSCH CNC CC220

unlock code for BOSCH CNC CC220

unlock code for BOSCH CNC CC220