I dont think you need drivers for the card emco isa rs485 ...
I installed it in a win 98 pc just ran the software and detected it...
Try the other port on the card... maybe that will work..
We have a PC Turn 50 lathe at our college, which has just fried the motherboard in the pc. I have managed to find a new pc so that I could save the software as have lost all software disks. I have put the RS485 card and hard drive in new pc. All starts up fine with software working, however I don't have a driver for the card, so the pc will not connect to the lathe. Does anyone have the drivers, or is there anywhere I can download the device drivers? Windows 95 drivers required.
Help with this would be appreciated as EMCO have said it will cost over a £1000 to update the lathe to connect to a new PC with Windows XP.
Similar Threads:
I dont think you need drivers for the card emco isa rs485 ...
I installed it in a win 98 pc just ran the software and detected it...
Try the other port on the card... maybe that will work..
Hi
Can you sent for me a picture of your interface card rs485 to this email:lotfi.teach@gmail.com
I would happy if you do it.
thank you
did anyone try to update de software via emco updates?... i mean, look at this,
Software/Controls*EMCO lathes and milling machines for CNC turning and milling[view]=6&cHash=95be609263
im trying to do that right now,,, if i succed will notify you...
Where you able to make it work with the new updates?
hello friends. i bougth an used emco pc turn 50, i have a compatible computer, but the installation disc are broken, anybony can help me to find the correct software to make work my turn... thaks ...
Hi have u find a software for the Pc turn 10
Hi
I have problem with installtion disc for emco pc turn 50, anybody can help me with it .
Thank you in advance for your help.
Whats your problem?