Hello, All
First post, hopefully in the right place. Added a motorized Z drive to my 60W fiber laser, push button control and DRO. What I want to do is operate via a CNC type display panel, any suggestions?
Here is what I have so far:
DM542 Driver
DSC-1E pulse controller with a couple momentary buttons and a rheostat
4 wire stepper motor
So now I have it working with the push buttons but would like to be able to program moves, like up 4mm, back to zero, etc. . Low cost 1 axis control panel?
Here is the kit I used except for didn't use their driver:
https://www.aliexpress.us/item/32568...andl_shipto=US

Similar Threads: