Need Help! AXBB-E


Results 1 to 4 of 4

Thread: AXBB-E

  1. #1
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default AXBB-E

    I haven't been on here for a long time. I have modified my existing machine to a larger machine. I am wanting to go ethernet for my controller. I have tried two AXBB-E controllers and can't get my computer to recognize either one. I will be using Mach3 and a direct connection to the controller. I ordered from CNC4PC and tried everything they suggested. I have been very busy working on jukeboxes and have not needed the machine until now. I am open for suggestions.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    1476
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by bat47 View Post
    I haven't been on here for a long time. I have modified my existing machine to a larger machine. I am wanting to go ethernet for my controller. I have tried two AXBB-E controllers and can't get my computer to recognize either one. I will be using Mach3 and a direct connection to the controller. I ordered from CNC4PC and tried everything they suggested. I have been very busy working on jukeboxes and have not needed the machine until now. I am open for suggestions.
    Are you using a standard ethernet cable or a crossover cable?.
    Manual says use a crossover for direct connection.

    I have the UC300eth direct to a laptop using a 3m crossover cable.
    Make sure you also read the user manual and go through all the ip address configuration correctly.



  3. #3
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: AXBB-E

    Done all of that. I have tried both cables. Arturo from CNC4PC told me to use a standard cable because the crossover was done inside the device. I cannot configure the ip address because the device does not show on the network. I have tried both the windows search and the UCC download and neither can locate the device.



  4. #4
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    1476
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by bat47 View Post
    Done all of that. I have tried both cables. Arturo from CNC4PC told me to use a standard cable because the crossover was done inside the device. I cannot configure the ip address because the device does not show on the network. I have tried both the windows search and the UCC download and neither can locate the device.
    Windows search?. That won't do owt.
    The device may not be named specifically on the network, you may need to rename it.
    Get the manual and go through pages 7 and 8. And you likely have to change the ip address of the lan port itself for pc to see it.

    Make sure you don't have ip conflict if you have more than 1 lam and/or WiFi.
    Not usual for people to have much grief trying to connect.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AXBB-E

AXBB-E

AXBB-E