rznc controller


Results 1 to 8 of 8

Thread: rznc controller

  1. #1
    Member mgilly's Avatar
    Join Date
    Oct 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default rznc controller

    Hi Everyone ! I have a laguna swift 2x3 and in attempting to speed up feed rate altered the "Z" settings and cannot get the machine working correctly again. I would greatly appreciate help with this as my shops been down over a week now and orders are piling up !! Laguna customer service hasn't been helpful. THANKS !

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    344
    Downloads
    1
    Uploads
    0

    Default Re: rznc controller

    The first thing to do will be to reverse all changes, but I guess you have done that already!

    cannot get the machine working correctly
    What is not working?
    What settings did you change
    Do you have a manual (link)



  3. #3
    Member mgilly's Avatar
    Join Date
    Oct 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: rznc controller

    Hi The z movement is incredibly slow when using the touch off puck and not much faster when moving manually. It doesn't cut the depth as programmed and doesn't return to up limit when done. x,y speeds function are fine C>A>D> in controller is entered correct but when the puck is used it runs as if the top of the puck is the work surface.



  4. #4
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    344
    Downloads
    1
    Uploads
    0

    Default Re: rznc controller

    Quote Originally Posted by mgilly View Post
    The z movement is incredibly slow
    This could be due to a wrong (to high) step resolution (steps/mm). If you jog 1 mm, is the distance really 1 mm?



  5. #5
    Member mgilly's Avatar
    Join Date
    Oct 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: rznc controller

    Thanks ! Would that be the Pulse/mm under Equivalent settings ?



  6. #6
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    344
    Downloads
    1
    Uploads
    0

    Default Re: rznc controller

    Yes, that could be the setting

    Before you change it, note the old value!



  7. #7
    Member mgilly's Avatar
    Join Date
    Oct 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: rznc controller

    Yes ! That was it. Machine is running perfectly now. Your help was just what I needed. Thank you Thank you !!!!!



  8. #8
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    344
    Downloads
    1
    Uploads
    0

    Default Re: rznc controller

    Great to hear it is working again.

    It is safe to note all settings in case of a disaster.

    Looking at your machine, i expect it is already tuned at maximum performance.

    greetz, Huub



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

rznc controller

rznc controller

rznc controller