Connecting an MPG to the SMC5

[NTSOS]

Confusion........I wish there was a simple explanation like the green wire of the MPG goes to pin #18 of the DB26 on the SMC5.

I know IN1 and IN2 of the DB26 and IN1 and IN2 of the input port are connected internally to each other but what color wire is connected to them on the DB26? What is CN connected to on the DB26? What is the Red/Black wire for?

https://www.fastercnc.com/2019/05/08...o-connect-mpg/

Thanks.

John

Similar Threads:

• smc5-5-n backlash control
• SMC5-5-N-N Chinese controller - anyone have experience with it?
• Connecting MPG to MK3/4
• MPG: Can I hook up directly to JP6... MPG is 5vdc logic? Do I need to use Resistors?

[NTSOS]

If anyone is even interested:

DB26 Wire Colors
Pin#

1- B - White-M-B

2- X - Yellow

3- Y - Yellow/Black

4- Z - Brown

5- - Blank

6- MD - White/Black-Led

7- GND - Black

8- IN2

9- +5V - Red

10- A - Green-M-A

11- GND

12- GND - Blue/Black-CN

13- GND

14- GND

15- GND

16- GND - Orange/Black-COM

17- - Blank

18- +5V - Green/Black-Led

19- X1 - Gray

20- X10 - Gray/Black

21- X100 - Orange

22- A(4) - Brown/Black

23- B(5)

24- C(6)

25- - Blue-eStop-C-IN1

26- +5V