G540 / UC100 Controller Build for GenMitsu 3018 routers


Results 1 to 4 of 4

Thread: G540 / UC100 Controller Build for GenMitsu 3018 routers

  1. #1
    Member evanevery's Avatar
    Join Date
    Dec 2020
    Posts
    7
    Downloads
    0
    Uploads
    0

    Question G540 / UC100 Controller Build for GenMitsu 3018 routers

    I've had very good luck with my Genmitsu 3018 ProVer MX3. However, I'm not particularly enthusiastic about the Mach3 controller solution... I also have the GRBL controller for the 3018 but that's not the direction I want to be moving.

    I'ld like to build a controller solution for my 3018 based on the G540 and a UC100 so I have maximum flexibility and can use it with all three major Win10 software controller solutions (Mach3, Mach4, UCCNC). This is more about ME than the ROUTER itself.

    I know to some (most!) folks, this might seem overkill for a little $350 3018, but I expect the electronics/controller might very well be migrated fwd into a larger more capable platform at some point in my future.

    I'm pretty sure I have most of the pieces figured out. (This includes a 24V power supply to feed the 12v-24V 775 spindle and a 10A 0-10V "LED PWM dimmer" to function as its speed control).

    However, if anyone has any past experience or input on this project I'ld be interested in whatever suggestions might be provided.

    Thanks!

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35456
    Downloads
    1
    Uploads
    0

    Default Re: G540 / UC100 Controller Build for GenMitsu 3018 routers

    Get a UC400ETH instead of the UC100. It's more powerful, more expandable, and has much better noise immunity than a UC100, for only about $25 more.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member evanevery's Avatar
    Join Date
    Dec 2020
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: G540 / UC100 Controller Build for GenMitsu 3018 routers

    Noted.

    Will it plug directly into the G540? IOW: Is there a readily available cable to go from the UC400ETH to the G540?



  4. #4
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35456
    Downloads
    1
    Uploads
    0

    Default Re: G540 / UC100 Controller Build for GenMitsu 3018 routers

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G540 / UC100 Controller Build for GenMitsu 3018 routers

G540 / UC100 Controller Build for GenMitsu 3018 routers

G540 / UC100 Controller Build for GenMitsu 3018 routers