Reply with QuoteHappy I could be of some help.Originally Posted by ddlaz
Re: CNC Tensilathe Upgrades and Conversions
Certainly wouldn't have that capability right now. I guess I'll be on the hunt for some parts and get back to you. You've been a great help so far.
Re: CNC Tensilathe Upgrades and Conversions
Happy I could be of some help.
Jim Dawson
Sandy, Oregon, USA
Re: CNC Tensilathe Upgrades and Conversions
Picked up the DMC-1840. You previously linked to the phoenix contactor module, what is the difference between that and the ICM-1900? My understanding was that the phoenix contactor board is the terminal block for the wires from various components to the galil card. The ICM-1900 appears to do the same thing but selling for much less.
https://www.ebay.com/itm/Galil-ICM-1...cAAOSwJiJexKh0
Re: CNC Tensilathe Upgrades and Conversions
I have never seen a ICM-1900 at that price before. They are functionally equivalent. The MD-100 is more convenient to use, has more ground and power connections, more compact. Smaller footprint, and easier to mount (DIN rail vs. panel mount)
Jim Dawson
Sandy, Oregon, USA
Re: CNC Tensilathe Upgrades and Conversions
Got the DMC-1840 card. Put it into one of my old pc's and installed drivers. Although I'm still missing the cable and contactor board, can you send me your controller software you mentioned previously? I'd like to tinker with it until all of the parts are here. Board is supposed to arrive sometime in late January.
Thanks!
Re: CNC Tensilathe Upgrades and Conversions
Turn on your Private Messaging and I'll send you a link to the software.
Jim Dawson
Sandy, Oregon, USA
