G3CNC 4 axis plug and play Controller


Results 1 to 5 of 5

Thread: G3CNC 4 axis plug and play Controller

  1. #1
    Member
    Join Date
    Dec 2004
    Location
    usa
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default G3CNC 4 axis plug and play Controller

    Hello all, I don't know if any of you have seen this controller unit, but I took the plunge and ordered one. I should have it in a few days. Just finished my new machine and thought I would save some time and purchase this one. Specs seem to be good quality parts , I will let you know when I receive it. G3 CNC.

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35137
    Downloads
    1
    Uploads
    0

    Default Re: G3CNC 4 axis plug and play Controller

    It uses the RNRmotion.DLL Mach3 plugin, which means it uses a junk Chinese controller.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member
    Join Date
    Dec 2004
    Location
    usa
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: G3CNC 4 axis plug and play Controller

    I received my unit thursday and it looks great. Set up was a breeze, about 15 minutes. I hooked it up to my air cooled spindle and VFD last night and my router is running great. I gave it a test run with some scrap wood and cut one of my guitar bodies and it was flawless, no issues. As advertised it is designed and built for hobbyist, which I am. I am happy with the 32bit dsp all digital dm556 drivers. I received an email with set up instructions and a note that I actually received 566 oz stepper motors instead of 425's. I am pleased with it. I will fire it up tomorrow or monday on some mahogany wood for a new guitar body. I have to say that early on I am impressed and pleased.



  4. #4
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35137
    Downloads
    1
    Uploads
    0

    Default Re: G3CNC 4 axis plug and play Controller

    As with everything in HobbyCNC, as long as YOU are happy with it, that's all that matters.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Member
    Join Date
    Dec 2004
    Location
    usa
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: G3CNC 4 axis plug and play Controller

    Cut through the mahogany body today, every thing went well. It was hot in Tennessee today, the sanyo denki fans seemed to keep everything in my new controller cool, no heating issues.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G3CNC 4 axis plug and play  Controller

G3CNC 4 axis plug and play  Controller

G3CNC 4 axis plug and play  Controller