- Newbie Help Cincom C16 Type 9 Controller Stuck
-
Member
Newbie Help Cincom C16 Type 9 Controller Stuck
Thank you in advance for any suggestions.
I am helping my shop with this issue. The controller is stuck at the boot / BIOS screen. The battery was replaced and the screen is asking for an F1 or F10.
CARD-PC Version : PC011-A
301 - Keyboard error
032304 KB Ok
161 - Real TimeClock has lost power
(Run setup)
162 - System options not set
(Run setup)
04/00
The Mitsubishi controller is labeled FCA635LCCH. This appears to be a standard controller for this CNC.
Thank again for any help.
-Kevin
Similar Threads:
-
-
Registered
Re: Newbie Help Cincom C16 Type 9 Controller Stuck
Hi Kevin,
I have the exact same problem with an M16, could you solve it?
-Ruedi
- Newbie Help Cincom C16 Type 9 Controller Stuck
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules