Delta NC300 contoller setup master slave


Results 1 to 9 of 9

Thread: Delta NC300 contoller setup master slave

  1. #1
    Member
    Join Date
    Sep 2009
    Location
    Romania
    Posts
    88
    Downloads
    0
    Uploads
    0

    Default Delta NC300 contoller setup master slave

    Hello

    tried to search for some threads on Delta CNC solutions: Delta NC300 controller with ASD-A2 drives and motors (750W) but in vain.
    We tried to setup the 4 axis, drives and motor work, but as the Delta manuals (for controller and drives) are so thin, could not find a way to set the master/slave parameters and make it work.
    Not sure if anyone familiar with the controller, but worth trying to see if anyone has an idea on how it works.
    So in the NC the axes are defined, and parameters for the A axis slave to Y axis is set. Still, the when moving Y, A motor does not move. When tryi ng to move A, it works.
    No error is popping up.

    I tried to contact Delta customer service but in vain.

    I assume the controller adopts standard setup. So suggestions on how other c0ntrollers are set might work.

    here the link to NC300 controller manual.
    http://www.deltaww.com/filecenter/Pr...N_20160309.pdf

    Any input appreciated.

    Marius

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2009
    Location
    Romania
    Posts
    88
    Downloads
    0
    Uploads
    0

    Default Re: Delta NC300 contoller setup master slave

    SOLVED

    the firmware was too old, and update solved the issue instantly



  3. #3
    Member
    Join Date
    Mar 2008
    Location
    santiago
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hello dear I have the same control and I have some problems has the firmware and if you can give it to me, I would appreciate it.




    Quote Originally Posted by nicubila View Post
    SOLVED

    the firmware was too old, and update solved the issue instantly




  4. #4
    Member
    Join Date
    Sep 2009
    Location
    Romania
    Posts
    88
    Downloads
    0
    Uploads
    0

    Default Re: Delta NC300 contoller setup master slave

    Quote Originally Posted by ananayas View Post
    Hello dear I have the same control and I have some problems has the firmware and if you can give it to me, I would appreciate it.
    did you solved it?



  5. #5
    Member
    Join Date
    Mar 2008
    Location
    santiago
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Delta NC300 contoller setup master slave

    Quote Originally Posted by nicubila View Post
    did you solved it?
    I have not been able to fix it. Can you please send the firmware and information to me at ananayas@hotmail.com. I would appreciate it very much



  6. #6
    Member
    Join Date
    Mar 2008
    Location
    santiago
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ananayas View Post
    I have not been able to fix it. Can you please send the firmware and information to me at ananayas@hotmail.com. I would appreciate it very much
    Nicubila .Help please



  7. #7
    Member
    Join Date
    Sep 2009
    Location
    Romania
    Posts
    88
    Downloads
    0
    Uploads
    0

    Default Re: Delta NC300 contoller setup master slave

    Hi,

    only now I managed to get the file, hope this is the one.I cannot upload it as original *.pkf, so you have to change the extension.

    this is the instructions i received. But because it is 2 years ago when it was installed by someone else on my nc300, i cannot say if this is really how it works.

    Marius
    ps: I managed to make work the homing for absolute encoders in case you need it. it is a simple file, few lines

    Attached Files Attached Files


  8. #8
    Member
    Join Date
    Mar 2008
    Location
    santiago
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Nc300 expiration time

    Hello

    can anyone help nc300 .expiration time



    Delta NC300 contoller setup master slave-screenshot_20230318_154838_gallery-jpg

    Delta NC300 contoller setup master slave-screenshot_20230318_154939_gallery-jpg

    Last edited by ananayas; 03-18-2023 at 03:34 PM.


  9. #9
    Member
    Join Date
    Sep 2009
    Location
    Romania
    Posts
    88
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ananayas View Post
    Hello

    can anyone help nc300 .expiration time



    Delta NC300 contoller setup master slave-screenshot_20230318_154838_gallery-jpg

    Delta NC300 contoller setup master slave-screenshot_20230318_154939_gallery-jpg
    So can you work with it or not?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Delta NC300 contoller setup master slave

Delta NC300 contoller setup master slave