Newbie Need to know if possible to used computer and motor drives on two different machine


Results 1 to 2 of 2

Thread: Need to know if possible to used computer and motor drives on two different machine

  1. #1

    Cool Need to know if possible to used computer and motor drives on two different machine

    I am converting my vertical mill to cnc, I want to know if i put all control in one mobile cabinet can I used on diy cnc router and mill. by just getting more stepper motors for diy router [plug controls into ether machine} thanks hope to recieve input

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    191
    Downloads
    0
    Uploads
    0

    Default Re: Need to know if possible to used computer and motor drives on two different machi

    You can use the controller cabinet on more than one machines. If you are going to connect and disconnect often, you need good quality connectors. Use identical motors on both machines so you don't need to adjust the drivers each time. Use a separate setup/configuration file for each machine. Power off and disconnect from the supply (wall outlet) before you (dis)connect a machine.



  3. #3
    sharook121's Avatar
    Join Date
    Feb 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    yes, we can control the machine using the computer but its not a complete computer its microprocessor contain with some certain commands thithesemmands are regulating this system is called PLC ( Programmable Logic Controller ) now IPCS Automation providing PLC Training in Chennai



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need to know if possible to used computer and motor drives on two different machine

Need to know if possible to used computer and motor drives on two different machine