I know that some people have run UCCNC on a Windows tablet with a UC100.
Hi all, some time ago I built a CNC quilt machine for the wife. Works really well with mach3 and an old laptop, I'd like to replace this with an tablet. Sure the laptop works but I'd like to incorporate a tablet into the machine and make it look more professional. I do the stitch / tool path on another pc. I only use low power motors, 2 axis plus relay control so I was thinking about getting a tinyg board or similar to run the machine. I've been doing a fair bit of looking but can't find anything thing suitable to say, load the code into a tablet, set the positioning ect then press start and watch it do its magic.
Would appreciate any direction you guys can offer, would eventually like to make it simple enough so my wife can use I by herself......
Cheers Dave
Similar Threads:
I know that some people have run UCCNC on a Windows tablet with a UC100.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)