The plugin status window has nothing to do with the spindle.
Need to see your ports and pins, output pins, and spindle pages, and details of how the VFD is wired and controlled.
Hello,
I am running MACH3 on Windows 7, and having given up on the UC100, I have got a UC400ETH which is working OK apart from the spindle does not start.
I am attaching a picture of the current settings.
Is there something wrong with them?
Any help would be appreciated.
Thanks
Nick
Similar Threads:
The plugin status window has nothing to do with the spindle.
Need to see your ports and pins, output pins, and spindle pages, and details of how the VFD is wired and controlled.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)