Need Help! Mach3 output pin only gives 0.6v


Results 1 to 3 of 3

Thread: Mach3 output pin only gives 0.6v

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    South Africa
    Posts
    22
    Downloads
    0
    Uploads
    0

    Angry Mach3 output pin only gives 0.6v

    My Mach3 USB Bob only gives 0.6v on any of my output pins...... And the weird thing is when I use my tester and I ground it on COM and put the positive end on my output pin I get 5v.....something is wrong.... But what?

    Similar Threads:


  2. #2
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: Mach3 output pin only gives 0.6v

    Are those open collector outputs?



  3. #3
    Registered
    Join Date
    Mar 2018
    Location
    South Africa
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 output pin only gives 0.6v

    it provides a signal only



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach3 output pin only gives 0.6v

Mach3 output pin only gives 0.6v