- Need Help!- RICHAUTO A11E - No USB?
-
Registered
RICHAUTO A11E - No USB?
Hi Everyone
I recently purchased an cnc router that is controlled by a RICHAUTO-AUTONOW-A11E controller.
The problem i have is that it will not recognise and usb sticks or the computer. When i try to read the USB stick is just states "There is no item in this directory." I also can't work out how to get the controller to plug & play to the computer.
I have tried
15+ USB sticks
safe removing usb sticks
Several different .tap & .nc file formats.
3 different usb leads to the computer.
clearing currently saved files.
powering up the unit with usb in already
powering up and then plugging in the usb
reading the 60 page chinglish manual over & over thinking i missed something.
different usb ports
different computer
I am not getting and lights on the USB stick so i am not sure if the controller is faulty or whats going on.
I'm also not sure if i am even trying to access the files correctly as the manual is so bad.
Can anyone with experience with this controller please give me some guidance.
After sales service is no good due to Christmas / New Year holidays
Thanks
Ben
Similar Threads:
-
-
Registered
Re: RICHAUTO A11E - No USB?
Anyone got and advice. More info needed?
-
Member
Re: RICHAUTO A11E - No USB?
I got the same model and same problem
did you find a solution?
-
Member
Re: RICHAUTO A11E - No USB?
To see the handle via USB to PC:
1. power it up while holding the OK and CANCEL buttons.
2. Leave the CNC machine OFF, use item 1 and connect USB cable to handle
If you do the above, the handle needs to be power cycled to then control the machine.
Filenames on a USB stick work with *.NC extension. Try using the RUN/PAUSE button to access the UDISK (external USB).
Also, go through the SETUP screens to ensure all is enabled for what you want. Note that the A11 propable needs to be to to honour G and M codes from programs otherwise it might ignore settings like "F" for speeds.
-
Member
Re: RICHAUTO A11E - No USB?
I have this problem and it is solved by formatting the USB stick to FAT32.
- Need Help!- RICHAUTO A11E - No USB?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules