Tria 7500 for Morbidelli Author 503


Page 1 of 4 1234 LastLast
Results 1 to 20 of 76

Thread: Tria 7500 for Morbidelli Author 503

  1. #1
    Registered
    Join Date
    Jun 2006
    Location
    Denmark
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Tria 7500 for Morbidelli Author 503

    Need urgent help for a Tria 7500 controller. Back-up batteri is gone dead, so the controller lost all data. Need help for the procedure to reinstall data. Got disk whith all data on (original) but need help step for step.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2006
    Location
    Mexico
    Posts
    14
    Downloads
    5
    Uploads
    0

    Default

    I have the steps and the disk.. of the Tria-7500
    but my Machine it's an Author 504K

    And I don't know... if they are compatible......



  3. #3
    Registered
    Join Date
    Jun 2006
    Location
    Denmark
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Morbidelli A 503 STC

    Thank`s for the reaktion. It is working on a 503 STC, and we are now running again. The codes to be set is diffrent on the 2 maschines. For a Author 503 STC is it 1194121 space 1195457. I hope it can be usefull for others.
    Stoned.



  4. #4
    Registered
    Join Date
    Dec 2008
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Morbidelli 504k

    I have a morbidelli 504k and I need PLC and wakeup code . Thanks



  5. #5
    Registered
    Join Date
    Jun 2006
    Location
    Denmark
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hey Ronnieworks.
    I have got both code and procedure to load plc files agin. If i get your mail address i will send it to you as attached word file. You probartly forgooten to renew the back up battery, i tried it myself.
    Best regards: Stoned



  6. #6
    Registered
    Join Date
    Dec 2008
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Morbidelli 504k

    Quote Originally Posted by stoned View Post
    Hey Ronnieworks.
    I have got both code and procedure to load plc files agin. If i get your mail address i will send it to you as attached word file. You probartly forgooten to renew the back up battery, i tried it myself.
    Best regards: Stoned
    ronnie_52132@yahoo.com Thanks



  7. #7
    Registered
    Join Date
    Dec 2008
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Is your 504k with a twin pack and tool drawer if so could I get the plc and parametors and wake up code.



  8. #8
    Registered
    Join Date
    Apr 2009
    Location
    USA
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Morbidelli 503

    Have codes and reload procedure for Author 504 and Author 503. email me at jgriminger@wallsforms.com



  9. #9
    Registered
    Join Date
    Apr 2009
    Location
    USA
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    NEED HELP with sizing on Morbidelli Author 503. Keep getting error 547 (Magazine Draw Back) when the machine DOES NOT have a tool magazine. jgriminger@wallsforms.com

    Last edited by R James; 04-22-2009 at 04:41 PM. Reason: Add Color


  10. #10
    Registered
    Join Date
    Oct 2009
    Location
    france
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default morbidelli author 504

    bonjour

    j'ai ma disquette parametre "HS" et doit les recharger sur la machine
    est ce que quelqu'un a ces parametres.
    merci



  11. #11
    Registered
    Join Date
    Aug 2010
    Location
    Denmark
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Need urgent help for a Tria 7500 controller. Back-up batteri is gone dead, so the controller lost all data. Need help for the procedure to reinstall data. Got disk whith all data on (original) but need help step for step.



  12. #12
    Registered
    Join Date
    Feb 2012
    Location
    canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Need Help! Tria 7500 Author 503 morbedelli with automatic tool exchange

    Need Help! Tria 7500 Author 503 morbedelli with automatic tool exchange:Can not find the proper start up discs ours seem to not be working ... contacted scm in the states with no luck tried calling UK with no reply yet. Can anyone help ? Thank you !!



  13. #13
    Registered
    Join Date
    Jun 2011
    Location
    vietnam
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Morbidelli Author 503 (1995)

    Hi all.
    Is there anyone who can tell me if you can use G code X Y Z generatet from PC then transfered to the CNC by floppy disk?

    example would be nice

    I ask because right now we program directly on the CNC point to point and we use autocad to get the point to points and then punch them in manualy and some of the programs are very very long so it would be good to have a program where you can import the autocad drawing and generate the X Y Z and just copy it to a floppy disk and load it as a SUB program.
    Any ideas is helpful guys.

    Best regards
    Flemming



  14. #14
    Member
    Join Date
    Feb 2006
    Location
    Mexico
    Posts
    14
    Downloads
    5
    Uploads
    0

    Default

    I do not understand your question, you mean to create a file and then copy it to CNC?

    Usually uses CAD/CAM Sofware.

    but for TRIA controls, you need a system that converts
    ASCII to PGM

    Some CAD/CAM Software to Programing TRIA 7xxx Controls are:

    ASPAN
    XILOG PLUS
    ALPHACAM

    I hope this information is helpful...



  15. #15
    Registered
    Join Date
    Oct 2012
    Location
    Belarus
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Plz help me i have morbi 504 and i need help for load plc ste by step email redline5@rambler.ru



  16. #16
    Member
    Join Date
    Feb 2006
    Location
    Mexico
    Posts
    14
    Downloads
    5
    Uploads
    0

    Default

    I sent to you the Steps to load PLC data in AUTHO504

    By Email..



  17. #17

    Default

    Hola Baldo.
    Soy de Madrid (España), ¿Me podrías enviar por E-mail los pasos para cargar el programa de PLC en
    el AUTHOR 504. Muchas gracias. jesus@hebersl.com



  18. #18
    Registered
    Join Date
    Aug 2013
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi. Somebody have the user´s guide for program morbidelli 503, the list of g-codes available and I need access to the list of corrector x and y. thanks

    Julio



  19. #19
    Member
    Join Date
    Feb 2006
    Location
    Mexico
    Posts
    14
    Downloads
    5
    Uploads
    0

    Default

    XILOG PLUS software is special for TRIA controls
    and has a programming guide, G00, G01, G02 etc.



  20. #20
    Registered
    Join Date
    Aug 2013
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    I have a morbidelli author 504. Replaced the battery and could not get it started again. Keep getting message that the plc is blocked. Can someone please help me or post me some instructions on how to get it going again.
    Thanks



Page 1 of 4 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tria 7500 for Morbidelli Author 503

Tria 7500 for Morbidelli Author 503