Heidenhain DPRNT equivalent

[Rupe]

I've a 5 axis mill with iTNC530 and want to be able to view from status monitoring software the value of a variable set in Q99.
In Fanuc I could DPRNT this out via RS232.

Is there an equivalent in Heidenhain world please?

Or. via tcnrmo/tnccmd on a local PC it is possible to view Machine Parameters and other bits of data in the control over Ethernet but I cannot find out if its possible to view a QXX variable.
does anyone know the syntax to do that?

Or can I create a Machine Parameter and use it as a variable that tnccmd will view, something like MP99 = Q99 and the MPGET 99 (assuming for the moment that there isn't a machine parameter 99 already existing)

Hopefully.

Similar Threads:

• Need Help With DPRNT to usb
• Pulse equivalent
• New Machine Build- DPRNT
• Newbie- DPRNT help
• Do you use DPRNT?

[guypb]

FN16 FPRINT is what you need. You can then set up a TNCCMD script to automatically obtain the value. PM me if you want more details.

[Rupe]

Sorry, a bit late to reply I know. Yep I found that shortly after I posted but forgot I had. But thanks for the response.

[JamesQ]

FN16 FPRINT is what you need. You can then set up a TNCCMD script to automatically obtain the value. PM me if you want more details.

Hi guypb, I am looking for manual/example of using tnccmd to extract cutting time from Heidenhain controller, can you please share me the information if you have?

Thank you.

[csaky67]

Cutting time and anything else is possible:

https://www.heidenhain.com/products/...cted-machining

With HEIDENHAIN DNC (RemoTools SDK software development package) you can solve anything...
In the end, of course, you will realize that you need the StateMonitor application.