- RS 232 communication using LABview for modem
-
Registered
RS 232 communication using LABview for modem
hye..i'm a newcomer here and i really need this community help. i'm learning how to communicate with RS 232 modem.how to get the data from RS232 modem...i'm using LAbview basic serial read and write VI. i'm using the AT command but the reponse is the same as the AT command..how to convert the data we get from the modem to the info that we want which is i want the info about the modem..
Similar Threads:
-
-
Registered
Re: RS 232 communication using LABview for modem
hi my firend
if you want use labview for comenionation with another thing you should :
1- install labview
2- install real time
if you want continuance i can help you
-
Community Moderator
Re: RS 232 communication using LABview for modem
I hope he figured it out. His post was from seven years ago.
- RS 232 communication using LABview for modem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules