Help needed to connect Mitsubishi Meldas to PC - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 19 of 19

Thread: Help needed to connect Mitsubishi Meldas to PC

  1. #13
    Registered
    Join Date
    Oct 2007
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default I would try

    First I would try to set HT in XON/XOFF mode and try to send code from machine to computer first. let me know what hapens.



  2. #14
    Registered
    Join Date
    Oct 2008
    Location
    peru
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default

    please i need the diagram wire for the rs232 db9 to db25 for the Meldas 500 Series I hope your cooperation. My email peruparty@hotmail.com



  3. #15
    Registered
    Join Date
    Jun 2010
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default nightmares

    i have a dyna 4800 cnc with a m3 mitzubishi contol i am unable to get communication from the computer using mastercam baud rate is 9600
    7 data bit and 2 stop bits to the cnc machine
    the settings dynametronics gave me were rechecked to 9600 with the 7data and 2 stop bits i tried all settings 8 data bits included and my machine has been down for 6 weeks . can anyone help me



  4. #16
    Gold Member
    Join Date
    Oct 2005
    Location
    USA
    Posts
    672
    Downloads
    0
    Uploads
    0

    Default

    manuf,

    You should be able to use the settings I have a couple posts up. I'm running Dyna DM4400s with M3 controls. Which port are you plugged into on the machine? The front control pendant or the rear power cabinet?



  5. #17
    Registered
    Join Date
    Jul 2009
    Location
    usa
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default FIXED

    Quote Originally Posted by manuf View Post
    i have a dyna 4800 cnc with a m3 mitzubishi contol i am unable to get communication from the computer using mastercam baud rate is 9600
    7 data bit and 2 stop bits to the cnc machine
    the settings dynametronics gave me were rechecked to 9600 with the 7data and 2 stop bits i tried all settings 8 data bits included and my machine has been down for 6 weeks . can anyone help me
    Between a machine repairman and Mitsubishi tech support,helping him over the phone. I got my 1994 SuperMaxx, Max 1 Rebel with Mitsubishi Meldas 3 control communications working fine with Mastercam. Took them 15 minutes, I tried for 2 days, with the book. Call Mitsubishi tech support, it's free.



  6. #18
    Registered CNC Viking's Avatar
    Join Date
    May 2008
    Location
    Sweden
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default

    2_jammer, koeitool,

    Have some elaborate answers in post #4 and #6 in this here thread. Hope it can add some help. My Meldas 520 AM works great with those settings.

    http://www.cnczone.com/forums/showthread.php?t=92907



  7. #19
    Registered
    Join Date
    Jan 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Help needed to connect Mitsubishi Meldas to PC

    someone could help me, I would like to know how Mastercam RECEIVE programs to Meldas mitsubishi 50



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help needed to connect Mitsubishi Meldas to PC

Help needed to connect Mitsubishi Meldas to PC

Help needed to connect Mitsubishi Meldas to PC